While you might think pressure sensitive adhesives (PSAs) are pretty straightforward, selecting the wrong for your enclosure application can create problems and compromise sealing performance long before final assembly takes place.
Learn the key features of each adhesive type in latest blog on the Rogers website, How to Choose the Right PSA for Your Enclosure Components, and the video below to get an idea of which adhesives perform well in different situations. Once you have an understanding, you can start designing more reliable sealing components for your enclosure applications.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
BISCO Silicone,
PORON,
Material selection,
die cutting,
gasket,
PSA,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation
In Part 2 of our gasket failure series, we shift from the discussion on material science & environmental factors to mechanical design & real-world installation. Even a high-performance gasket can fail due to poor geometry, fastener placement, uneven compression, lack of venting, or improper gasket placement altogether.
Find the latest blog on the Rogers website, 6 Reasons Why Gaskets Fail: Design and Assembly, and the video below to start designing more reliable sealing components for your enclosure applications today.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
BISCO Silicone,
Compression Force Deflection,
PORON,
compression set resistance,
Material selection,
die cutting,
gasket,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation,
Kiss-Cut,
Collapsible Gasket,
Multi-Piece Gasket,
Puzzle Gasket
Even the best-sealed enclosure can fail if the gasket material isn’t up to the challenge.
They say every failure is a step toward success, but we say that failure can be completely avoided by asking the right questions and having a clear understanding of your application's use case.
Lucky for you, we've condensed the important information we've learned over the years to help you make sure your enclosure is properly design right from the start. Check out the latest blog on the Rogers website, 6 Reasons Why Gaskets Fail: Materials and Environment, and the video below to start designing more reliable sealing components for your enclosure applications today.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
BISCO Silicone,
Compression Force Deflection,
PORON,
compression set resistance,
Material selection,
gasket,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation
From silicone to neoprene, each gasket material comes with trade-offs and will perform best in various situations, but how do you know which is best for your application and where should you start?
Have no fear, engineers! The Enclosure Institute™ has created a comprehensive guide on the Rogers website in the newest blog: Top 8 Sealing Material Options: How to Choose the Right One for Your Enclosure.
This blog that breaks down the key differences in compression set resistance, temperature range, chemical compatibility, and cost across eight popular gasket options. With this guide and the Sealing Checklist Workbook (available exclusively to Enclosure Institute™ registrants), you're one step closer to sealing excellence.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
BISCO Silicone,
PORON,
compression set resistance,
Silicone,
Material selection,
gasket,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation
“If it doesn’t seal, it’s not really an enclosure.” This engineer-focused resource from the Enclosure Institute™, a collaboration between Rogers Corporation and Marian, Inc., highlights eight practical factors for designing effective, long-lasting gaskets and seals. You can read the full article on the Rogers website.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
IP Rating,
BISCO Silicone,
Compression Force Deflection,
PORON,
ingress protection,
gasket,
Electronics,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation
NEMA (National Electrical Manufacturers Association), UL (Underwriters Laboratories), CSA (Canadian Standards Association), & IEC (International Electrotechnical Commission)—if you’ve ever felt overwhelmed by enclosure standards, our third blog from the Enclosure Institute™ is your go-to resource.
With so many standards guiding performance, safety, and environmental protection, it can be difficult to know which ones truly matter for your application. Whether you're designing for industrial environments, outdoor use, or specialized equipment, understanding these standards is critical—and easier than you think.
Disclaimer: The Enclosure Institute™ is a free educational resource created by Marian, Inc. and Rogers Corporation to help engineers navigate enclosure sealing with expert guidance.
Read More
Topics:
Foams,
IP Rating,
BISCO Silicone,
PORON,
ingress protection,
gasket,
Electronics,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation
What exactly are enclosures—and why does sealing matter so much? In this foundational blog from the Enclosure Institute™, we break down the role of enclosures across a range of industries, from EV charging to medical devices.
Read More
Topics:
Foams,
EMI Shielding,
IP Rating,
LED Lighting,
BISCO Silicone,
PORON,
medical device,
ingress protection,
gasket,
Electronics,
Enclosure Institute,
seals,
enclosures,
Rogers Corporation,
Data Center
Digital displays are an integral part of modern vehicle dashboards, household appliances, consumer electronics, and more. In applications like thermostats, cell phones, smart watches, and vehicles, displays allow a simplified, interactive experience for users. To make these digital display assemblies, manufacturers require a variety of die-cut components that, when combined, come together to make an impressive display that provides extreme clarity and a user-friendly experience, which we highlight below.
Read More
Topics:
Thermal Management,
Pressure Sensitive Adhesive,
EMI Shielding,
LED Lighting,
die cutting,
3M,
3m tape,
thermal pad,
thermal interface material,
gasket,
assembly,
Thermal Gap Filler Pads,
Polymer Science,
converting,
Films,
Electronics,
Thermal Gap Pad,
tesa,
displays
In the fast-paced world, electronics are now integrated into almost every aspect of human life. Solutions ensuring optimal performance and longevity are necessary to meet consumers’ expectations. Many converted electronic components are made using materials that address various challenges faced by electronics applications, including thermal management, electromagnetic interference (EMI), surface protection, and more.
Read More
Topics:
Thermal Management,
Pressure Sensitive Adhesive,
Foams,
EMI Shielding,
Surface Protection,
Vent Material,
die cutting,
thermal pad,
thermal interface material,
gasket,
Films,
Electronics
The need for EMI gaskets is growing as more high-frequency digital electronics are introduced into our everyday lives. This includes technologies like 5G infrastructure, IOT (internet of things), and rapid advances in automobile technology and connectivity.
Read More
Topics:
EMI Shielding,
gasket,
grounding
Outdoor LED lights are subject to a wide range of environmental elements and must be designed to withstand these hazards for the long life of LEDs. There are many components included in an outdoor lighting assembly, and one of the most important elements is a gasket. When choosing a material for an outdoor lighting gasket, it's imperative to understand the mechanics of an outdoor lighting fixture.
Read More
Topics:
LED Lighting,
Silicone,
gasket